咨询热线
18566398802ASTM C1184−14测试标准
-> ASTM C1184−14标准介绍
-> 符合ASTM C1184−14的仪器
ASTM C1184−14标准介绍
1. Scope
1.1 This specification describes the properties of cold liquid applied, single-component or multicomponent, chemically curing elastomeric structural silicone sealants herein referred to as the sealant. These sealants are intended to structurally adhere components of structural sealant glazing systems.
1.2 Only those properties for which there are industry-agreed-upon minimum acceptable requirements, as determined by available ASTM test methods, are described in this specification. Additional properties may be added as ASTM test methods for those properties become available.
1.3 The values stated in metric (SI) units are to be regarded as the standard. The values in parentheses are for information only.
1.4 Committee C24, with jurisdiction over this specification, is aware of two comparable standards by other organizations: ETAG No. 002 and the Chinese national standard GB16776.
2. Referenced Documents
ASTM Standards
C603 Test Method for Extrusion Rate and Application Life of Elastomeric Sealants
C639 Test Method for Rheological (Flow) Properties of Elastomeric Sealants
C661 Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
C679 Test Method for Tack-Free Time of Elastomeric Sealants
C717 Terminology of Building Seals and Sealants
C792 Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
C794 Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
C1087 Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
C1135 Test Method for Determining Tensile Adhesion Properties of Structural Sealants
C1401 Guide for Structural Sealant Glazing
C1442 Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
G151 Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
G154 Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials
G155 Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
European Organization for Technical Approvals Document
ETAG No. 002 Guideline for European Technical Approval for Structural Sealant Glazing Systems
符合 ASTM C1184−14 标准试验箱
-
氙灯老化箱
Q-SUN Xe-1-B是一款适合小型实验室的氙灯老化箱,其命名规程B指的是改型号的产品具有背部喷淋功能，这意味着在SAE部分标准的测试中尤其有用。
马上询价 -
氙灯老化试验箱
Q-SUN Xe-3-HSE氙灯老化试验箱具有全光谱光照功能、湿度控制以及喷淋功能，其命名规则为湿度控制(H)、喷淋(S)。
马上询价 -
氙灯加速老化试验箱
Q-sun Xe-1-BCE氙灯加速老化试验箱配有全光谱氙弧灯、太阳眼辐照度控制系统，该型号的氙灯加速老化试验箱同时具有背部喷功能。
马上询价 -
氙灯耐候试验机
Q-SUN Xe-1-SCE氙灯耐候试验机是一款支持水喷淋功能和制冷功能的氙灯加速老化设备
马上询价 -
氙灯耐气候试验箱
Q-SUN Xe-3-HDSE氙灯耐气候试验箱具有湿度控制、以及双喷淋功能,其命名规则为湿度(H)、双喷淋(D)、喷淋(S)。
马上询价 -
氙灯加速老化箱
Q-SUN Xe-3-HE氙灯加速老化箱是一款经济的氙灯加速老化箱，具备有湿度控制功能，但是该型号的产品不具备水喷淋功能。
马上询价